FDA 21 CFR §173.310 锅炉水添加剂

cuiwang2006

§ 173.310   Boiler water additives.

　　Boiler water additives may be safely used in the preparation of steam that will contact food, under the following conditions:

　　（a） The amount of additive is not in excess of that required for its functional purpose, and the amount of steam in contact with food does not exceed that required to produce the intended effect in or on the food.

　　（b） The compounds are prepared from substances identified in paragraphs （c） and （d） of this section, and are subject to the limitations, if any, prescribed:

　　（c） List of substances:

Substances	Limitations
Acrylamide-sodium acrylate resin	Contains not more than 0.05 percent by weight of acrylamide monomer.
Acrylic acid/2-acrylamido-2-methyl propane sulfonic acid copolymer having a minimum weight average molecular weight of 9,900 and a minimum number average molecular weight of 5,700 as determined by a method entitled “Determination of Weight Average and Number Average Molecular Weight of 60/40 AA/AMPS” (October 23, 1987), which is incorporated by reference in accordance with 5 U.S.C. 552(a). Copies may be obtained from the Center for Food Safety and Applied Nutrition (HFS–200), Food and Drug Administration, 5100 Paint Branch Pkwy., College Park, MD 20740, or may be examined at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.	Total not to exceed 20 parts per million (active) in boiler feedwater.
Cobalt sulfate (as catalyst)
1-hydroxyethylidene-1,1-diphosphonic acid (CAS Reg. No. 2809–21–4) and its sodium and potassium salts
Lignosulfonic acid
Monobutyl ethers of polyethylene-polypropylene glycol produced by random condensation of a 1:1 mixture by weight of ethylene oxide and propylene oxide with butanol
Poly(acrylic acid- co -hypophosphite), sodium salt (CAS Reg. No. 71050–62–9), produced from a 4:1 to a 16:1 mixture by weight of acrylic acid and sodium hypophosphite	Minimum mol. wt. 1,500.
Polyethylene glycol	Total not to exceed 1.5 parts per million in boiler feed water. Copolymer contains not more than 0.5 percent by weight of acrylic acid monomer (dry weight basis).
Polymaleic acid [CAS Reg. No. 26099–09–2], and/or its sodium salt. [CAS Reg. No. 30915–61–8 or CAS Reg. No. 70247–90–4]	As defined in §172.820 of this chapter.
Polyoxypropylene glycol	Total not to exceed 1 part per million in boiler feed water (calculated as the acid).
Potassium carbonate	Minimum mol. wt. 1,000.
Potassium tripolyphosphate
Sodium acetate
Sodium alginate
Sodium aluminate
Sodium carbonate
Sodium carboxymethylcellulose
Sodium glucoheptonate	Contains not less than 95 percent sodium carboxymethylcellulose on a dry-weight basis, with maximum substitution of 0.9 carboxymethylcellulose groups per anhydroglucose unit, and with a minimum viscosity of 15 centipoises for 2 percent by weight aqueous solution at 25 °C; by the method prescribed in the “Food Chemicals Codex,” 4th ed. (1996), pp. 744–745, which is incorporated by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies are available from the National Academy Press, Box 285, 2101 Constitution Ave. NW., Washington, DC 20055 (Internet address http://www.nap.edu ), or may be examined at the Center for Food Safety and Applied Nutrition's Library, Food and Drug Administration, 5100 Paint Branch Pkwy., College Park, MD 20740, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
Sodium hexametaphosphate	Less than 1 part per million cyanide in the sodium glucoheptonate.
Sodium humate
Sodium hydroxide
Sodium lignosulfonate
Sodium metabisulfite
Sodium metasilicate
Sodium nitrate
Sodium phosphate (mono-, di-, tri-)
Sodium polyacrylate
Sodium polymethacrylate
Sodium silicate
Sodium sulfate
Sodium sulfite (neutral or alkaline)
Sodium tripolyphosphate
Sorbitol anhydride esters: a mixture consisting of sorbitan monostearate as defined in §172.842 of this chapter; polysorbate 60 ((polyoxyethylene (20) sorbitan monostearate)) as defined in §172.836 of this chapter; and polysorbate 20 ((polyoxyethylene (20) sorbitan monolaurate)), meeting the specifications of the Food Chemicals Codex, 4th ed. (1996), pp. 306–307, which is incorporated by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies are available from the National Academy Press, 2101 Constitution Ave. NW., Box 285, Washington, DC 20055 (Internet http://www.nap.edu ), or may be examined at the Center for Food Safety and Applied Nutrition's Library, Food and Drug Administration, 5100 Paint Branch Pkwy., College Park, MD 20740, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.	The mixture is used as an anticorrosive agent in steam boiler distribution systems, with each component not to exceed 15 parts per million in the steam.
Tannin (including quebracho extract)
Tetrasodium EDTA
Tetrasodium pyrophosphate

　　（d） Substances used alone or in combination with substances in paragraph （c） of this section:

Substances	Limitations
Cyclohexylamine	Not to exceed 10 parts per million in steam, and excluding use of such steam in contact with milk and milk products.
Diethylaminoethanol	Not to exceed 15 parts per million in steam, and excluding use of such steam in contact with milk and milk products.
Hydrazine	Zero in steam.
Morpholine	Not to exceed 10 parts per million in steam, and excluding use of such steam in contact with milk and milk products.
Octadecylamine	Not to exceed 3 parts per million in steam, and excluding use of such steam in contact with milk and milk products.
Trisodium nitrilotriacetate

　　（e） To assure safe use of the additive, in addition to the other information required by the Act, the label or labeling shall bear:

　　（1） The common or chemical name or names of the additive or additives.

　　（2） Adequate directions for use to assure compliance with all the provisions of this section.

蒲公英老杨

谢谢楼主的分享。
过来支持下！

百万个为什么

原来有这么多添加剂和指导用量

虽然磕磕碰碰看一遍，还算理解。

下次发中文，求你了{:soso_e153:}

Enjoy

求中文啊求中文………………

一沙一叶

谢谢楼主，这块要慢慢啃了。因为目前为止，锅炉管理我们公司还是几乎空白。

一沙一叶

百万个为什么 发表于 2014-1-16 12:02
原来有这么多添加剂和指导用量

虽然磕磕碰碰看一遍，还算理解。

翻译一篇资料，比看懂要麻烦多了。

一沙一叶

Enjoy 发表于 2014-1-16 12:03
求中文啊求中文………………

这些利用翻译工具可以搞定，无非是化学名和限度，逻辑性、语法没那么多。

Enjoy

一沙一叶 发表于 2014-1-16 12:12
这些利用翻译工具可以搞定，无非是化学名和限度，逻辑性、语法没那么多。

额，搞去了……

百万个为什么

一沙一叶 发表于 2014-1-16 12:08
谢谢楼主，这块要慢慢啃了。因为目前为止，锅炉管理我们公司还是几乎空白。

我们也是

真要去学学了

百万个为什么

一沙一叶 发表于 2014-1-16 12:11
翻译一篇资料，比看懂要麻烦多了。

是啊是啊

哈哈